Tag Archives: Roof deicing

Protecting Your Roof and Gutters

Each spring, it’s a good idea for homeowners to check their roofs and make sure they survived winter’s icy barrage intact.  Look for damaged, loose and missing shingles, loss of granules on asphalt shingles, deterioration of the sleeves and flashing at vent pipes, and corrosion or damage of other roof flashing. (“Flashing” helps direct the flow of water around openings.) Also, take a look after any severe weather event.

Most roofs are designed to take the beating delivered by Mother Nature, but like everything else, roofs have an effective lifespan, so to prevent possible leaks and costly water damage it is recommended to inspect your roof twice a year. (Ideally, homeowners should inspect their roofs in the fall as well as in springtime.)

Clearing snow off of roof

Roofs in cold climate areas are susceptible to gradual deterioration over the years as a result of repeated freezing and thawing of snow in areas where pockets of ice accumulates. Roof damage can be very subtle, but tiny problems can grow into large, costly problems that not only affect the roof, but the inside of the home as well. That’s why careful inspection of the roof is so important.

The origins of roof problems and likely “leak points” are at its flashings (such as the drip edge, valleys, and wall-to-roof flashing). Penetrations such as plumbing vent pipes, chimneys and skylights are also more vulnerable to leaking. This means that a home with an elegant roof line that has multiple intersecting planes, a chimney and maybe a couple of dormer windows is more likely to leak than a simple gable roof on a rectangular-shaped house.

Most roof leaking is the result of an event, such as a strong storm followed by a threshold of deterioration after which the material begins to fail. Failure points can also be a result of manufacturing or installation defects. Also, ice dams are a common culprit when it comes to roof damage and water intrusion.

Snow and ice buildup occurs when runoff reaches the colder roof eaves and refreezes. Over time, the buildup increases, resulting in large rims of ice near the roof’s edge that cause water to pool behind it. The pooled water seeps under the shingles and refreezes at night, which can threaten the roof’s integrity and eventually lead to costly water damage inside the home.

Heated roof edge

Self-regulating heat cable and low-voltage RoofHeat STEP systems are two leading solutions for heating roof edges and preventing ice dams. These automated systems keep roof edges clear of snow and ice, and the heating elements can also be installed in the roof gutters to further facilitate runoff. Ensuring that water and ice are never trapped on your roof offers peace of mind, knowing that ice dams are not threatening your home. View more information and options for heating your roof.

The Importance of Taking Care of Your Roof

Helpful Roof Information

A quality roof is the key protective element of your home. A poor quality roof can wreak havoc with the interior once it starts to leak. Staining, mold, and rot can be the results of water intrusion. So when it comes to installing your home’s roof, keep these factors in mind:

  • Multiple-layer roof – A roof installed over an existing roof will have a shorter life.
  • Quality of roofing material – You get what you pay for. “Economy” roof materials have a shorter life
  • Installation – Sloppy or improper installation shortens roof life
  • Attic ventilation – An unventilated or poorly ventilated attic reduces roof lifespan.
  • Trees near the roof – Tree branches rubbing on a roof or the acidity from the accumulation of leaf debris on a roof can shorten the life of roof shingles.
  • Harsh climate – Severe weather, including hot summers as well as harsh winters. Dramatic temperature swings within a 24-hour period also shorten lifespan because of the rapid expansion and contraction of the roof materials.
Common Causes for Roof Leaking
  1. Poorly installed or missing flashings
  2. Incorrect installation of the roofing material
  3. Temporary repairs with mastic or caulk
  4. Ice and debris in gutters
  5. Improper deck over roof or low slope roof used as a deck
  6. Bolted-thru satellite dishes, solar systems
  7. Damaged plumbing boots
  8. Trees scraping or impacting the roof
  9. Ice dams
  10. Roofing material deterioration

To protect your roof from winter related damage, view our roof heating options page and contact a roof heating expert at 888.488.9276.

Additional Information

What is the Life Expectancy of a Roof?

The life expectancy of a roof varies, depending on the type of roofing material, the weather, and quality of the installation. With this is mind, here are some lifespan averages for the different types of roofs (based on “average” conditions).

  • Three-tab Asphalt Shingles: approximately 15 years
  • Architectural Asphalt Shingles: 24 to 30 years
  • Metal (Galvalume): 30 to 45 years
  • Concrete Tile: 35 to 50 years
  • Built-Up or Modified Bitumen: 10 to 16 years
  • EPDM (rubber): 10 to 16 years

Many factors contribute to the lifespan of a roof. Here are a few conditions that affect roof longevity:

  • Color of Roof – A dark roof absorbs more heat, which shortens the lifespan.
  • Angle of Roof Slope – Higher pitched roofs tend to last longer.
  • Orientation of Roof Surface – A roof slope facing south is exposed to more UV rays than other roof facings, and therefore results in a shorter life.

An Easy, Affordable Solution for Ground Fault Protection Requirements

Warmzone Continues to Listen to Contractors and Serve the Needs of Homeowners

Electric snow melting, roof deicing and outdoor pipe heating systems installed in the United States and Canada require ground fault protection for safe operation. In many cases, when installing a snow melting system, these breakers can be expensive and difficult to find. However, thanks to Warmzone, this is no longer an issue.

In addition to offering contactor panels with ground fault protection, Warmzone also offers separate ground fault protection units with snow melting systems and activation devices. These units provide an inexpensive, easy-to-integrate solution to meet the NEC requirements for ground fault protection equipment.

The GF-1 unit provides single circuit protection and the GF-2 provides dual circuit protection (for 120/208/240VAC circuits up to 60A). Unlike highly sensitive GFCI breakers, Warmzone’s GF unit maintains a 30mA fault trip point to reduce nuisance tripping. The unit’s unique design allows installation of standard, off-the-shelf overload breakers into the customer load center. Size the breaker and wiring for the system (15A to 60A), then install the GF unit between the load center branch circuit and the sensor/controller and heat cable. The overload breaker protects the wiring while the GF unit provides the ground fault protection.

The unit is housed in a rugged, NEMA 4X/IP65 rated enclosure, suitable for indoor or outdoor installation. The enclosure features a gasket-sealed front access door for easy testing and reset. All internal electronic components are specified for -40°C to +60°C operation. The enclosure can be easily surface mounted near the load center or near the snow melting system, depending on the installer’s preference. Numerous knockout locations on the enclosure provide flexibility for installation and wiring. The enclosure base can accommodate standard ½ and ¾-inch conduit hubs. Four mounting holes outside the enclosure gasket make mounting a breeze while assuring weather-tight performance.

Ground fault protection unit enclosure
Enclosure for ground fault protection equipment

Features

  • Easy installation; convenient access for wiring
  • Works together with inexpensive, off-the-shelf overload circuit breakers
  • Provides true 30mA trip point GFPE protection
  • Meets NEC Article 426.28, 427.22, and CEC 62-300 requirements
  • Protects 120/208/240VAC systems up to 60A (#14-#6 CU-only conductor capacity)
  • Not Compatible With 277VAC or L-N-L 240VAC
  • UL listed (U.S. and Canada) NEMA 4X enclosure for indoor or outdoor installation
  • Latching, sealed, hinged front cover for easy testing and reset access
  • No overload rating means just two part numbers for simple stocking
  • Weatherproof and corrosion resistant enclosure
  • Operating temperature range of -40°F/C to +140°F/+60°C

The GF-1 and GF-2 can be used directly with Warmzone’s WS-2C, WS-5C and WS-8C aerial mount snow sensors. They can also be used with contactor panels, switches, and any system up to 60A. Since the overload protection is provided by the load center breaker, only two GF models are required to cover the full range of 15A to 60A, one or two circuits. This allows ground fault protection with kitted systems without the requirement of identifying the customer’s load center type or need to research if a combined overload/GFPE breaker is available and how long it will take to receive.

Including a GF unit completes the snow melting system and makes it ready to install. And the GF unit provides a ready-made solution when installing or retrofitting a snow melting system in an older facility that was wired well before the term “GFPE” was coined. It’s an easy upgrade to help bring an existing system into compliance with modern code requirements.

Including a GF unit completes the snow melting system and makes it ready to install. And the GF unit provides a ready-made solution when installing or retrofitting a snow melting system in an older facility that was wired well before the term “GFPE” was coined. It’s an easy upgrade to help bring an existing system into compliance with modern code requirements.

As your radiant heat partner, Warmzone makes the process of installing a snowmelt system as easy as possible. For more information, call 888.488.9276 today.


Finding the Right Roof Heating System

Keeping your roof free and clear of ice and snow comes down to proven radiant heating elements, proper system design, and proper installation. A good radiant heat solution is one that addresses all of the potential problem areas of your roof.  Warmzone offers a variety of roof heating solutions designed to not only melt snow and ice, but to keep the runoff flowing from your roof before it has a chance to freeze. Warmzone products are specifically designed to target all aspects of a roof, including gutters, downspouts, roof lines, roof eaves and edges—the places icicles, ice dams, and snow build-up are most likely to occur. To keep your roof free of ice and snow, it’s important to target the typical problem spots.

Heating Gutters, Edges and Problem Areas

Warmzone self-regulating heat cable is an extremely effective and energy efficient way to prevent ice dams and keep water flowing through gutters and downspouts. Comprised of a rugged, durable outer construction and an irradiated conductive core that responds to variations in temperature, this durable cable is the affordable choice for heating problem areas of your roof.

Heating Roof Edges

The single greatest snow and ice problem for roofs is due to ice dams. Snow and ice buildup occurs when runoff reaches the colder roof eaves and refreezes. Over time, the buildup increases, resulting in large dams of ice near the roof’s edge, causing water to pool behind it. As that water seeps under the shingles and refreezes, damage can occur, and may eventually lead to costly water damage inside the home.

Low-voltage roof heating element

Low-voltage RoofHeat STEP systems can be installed discreetly under the shingles to keep roof edges completely free of snow and ice. This advanced system utilizes a thin, semi-conductive polymer heating element that can be nailed or stapled through to make installation quick and easy. The self-regulating heating element is polypropylene fused during fabrication to achieve water proofing and protection from alkaline or salt damage.

A 24-inch roof heating panel for heating roof edges.             An 18-inch roof heating panel

Attractive roof deicing panels can also be installed to eliminate the possibility of ice dams. Available in a variety of sizes, these aluminum panels feature channels of self-regulating heat cable that effectively heats the aluminum to keep roof edges free of snow and ice. The panels have an attractive Kynar finish and can be used in new construction and on existing roofs with most types of roofing materials, including asphalt, wood shake shingles, tile, slate or standing seam metal. Visit our roof deicing panel documents page to learn more.

Heating Roof Valleys

Four and six-inch RoofHeat deicing panels are also available to heat roof valleys. Keeping these channels free of snow and ice facilitates runoff and helps to protect your roof by eliminating potential trouble spots. The Valley Panel system will create an open area (up to 10 inches) for water to safely flow from the roof through the valleys without the possibility of water refreezing over unheated portions of the roof. The Valley Panel roof heating system provides an aesthetic look to any structure while keeping a more efficient and cleaner method of eliminating ice dam issues in a valley or dormer.

Eliminating Icicles

For areas of your roof where gutters are not present heated roof edges can be used to channel water away from the structure. Heated Drip Edge systems are extremely effective in battling icicle build-up while maintaining the aesthetic look of the original roof. This is a common, reliable solution for businesses to ensure the safety and convenience of pedestrian traffic. These Kylar-finished edge lines are offered in a wide variety of materials, including steel, copper, aluminum and more, so they’re great for concealing wiring along the drip line to create a more attractive, polished appearance.  An existing metal roof can also be retrofitted with roof heating panels, which can be laid on top of the old metal roof, in direct contact with the self-regulating heat cable to prevent icicle formation.

Still not sure what you need for your roof? Our radiant heat experts work with customers to evaluate project challenges and determine an affordable roof deicing system that is best for your unique circumstances. Warmzone roof heating experts are also available to walk you through the process, from system selection to installation. Call 888.488.9276 for more information today.

Sid the Snowflake gets Caught Behind an Ice Dam

The Adventures of Sid the Snowflake (Trapped Behind an Ice Dam)

Sid tumbled through the sky at the mercy of the wind. One gust sent him hurling up, back toward the gray mist that he’d just departed from, then another would suddenly push him down, spinning him in a different direction. He tried to catch a glimpse of the ground below as he careened through the stormy heavens, but all he could see was a sky full of his fellow snowflakes, all in the same predicament. Not knowing whether he was going to land in the ocean, on solid ground, or on the backside of a cow, Sid was filled with the angst of an uncertain future. A voice suddenly broke his reflective solitude.

“I’ll see you on the ground!” another snowflake yelled to him, seemingly enjoying his carefree flight.

“Alright,” Sid responded with trepidation as he glided closer and closer to earth. “Good luck!”

Illustration of Sid the snowflake for roof de-icing article

Sid knew the chance of seeing this new acquaintance again was slim. Snowflakes that begin their decent together often ended up miles apart by the time they reach the ground. Still, Sid took some comfort in the friendly words and embraced a small sense of reassurance offered by the stranger. Sid was just one of millions who were facing the uncertainty of an unknown destination. This was all part of their cycle of life.

The gusty winds subsided during Sid’s descent, and as visibility increased he could make out forms on the approaching ground. Sid’s last journey took him on an exciting adventure in the Northern Pacific Ocean, and he was half expecting the same. During that adventure, he enjoyed seeing a wide variety of exotic marine life, and he even had the experience of rolling across the back of a small humpback whale.

But today would be much, much different. There was land below. Not only was there land, there were people! Sid was headed for a city. He had fallen into a small town once before, and though the experience wasn’t horrible, it was far from being his favorite. Being scooped up in a shovel and tossed aside to be splattered by dirty, ill-mannered slush from passing cars was something he really hoped he wouldn’t have to endure again.

As he drifted toward the ground, Sid could see that many of his peers had arrived earlier, blanketing the uneven ground and buildings with a pristine layer of white. He plotted his landing and prepared for his arrival in the front yard of a small farm house. But a sudden gust tossed him aside and onto the roof of the house. He breathed a sigh of relief, grateful to be on a roof and not in some cow pasture. He was quickly joined by others, and the group settled in, not yet sure of their fate.

After four uneventful days on the roof, Sid started feeling a bit “loosey goosey” as warm air escaping from the attic warmed the roof and tickled his rear end. He watched as friends around him collapsed from their frozen state into clear liquid, each letting out a loud “whoo hoo” as they tumbled down the roof valley. They zigzagged their way down the giant water slide before crashing into a growing pool that had formed behind a large ridge of ice near the roof’s edge.

Then it was Sid’s turn. As his last frozen foothold gave way, he cascaded toward his friends, clumsily bumping into a few stubborn packs of ice before being released into the small pool. This would be Sid’s new home for a few days. The large ice dam wasn’t going to allow any of them to drip into the gutter or downspout anytime in the near future.

Illustration showing how roof ice dams form

Apparently, the ice dam had been growing long before Sid’s arrival. The shingles were much warmer higher up on the roof, but the surface near the roof’s edge was still cold. The roof extended out from the house, so there was no warm air from the attic.  When drops of melted snow trickled down into the freezing valley below, they collected and then during the cold nights, they transformed back into their frozen state. Without the warmth escaping from the attic as it did near the top of the roof, the frozen water would remain where it was, completely at the mercy of Mother Nature. Here Sid and his drippy friends would dwell until they could find a way past the ice dam. They could only wait for the temperature to slowly warm.

The process of melting and refreezing behind the formidable ice dam had repeated several times before Sid had arrived. And now, trapped behind the ice, Sid and his friends would also take part in that process. As night fell on another cold day, Sid and his companions once again changed back into their frozen state. They could do nothing but wait for warmer weather.

With each passing day, the crowd grew larger as runoff from warm areas of the roof increased the pool’s size. Milling about like restless concert goers awaiting the opening act, some of Sid’s cohorts grew impatient.

“Let’s work our way through this place and drip inside the house,” he heard one say. Soon, a plan was hatched, and an ample collection of rebellious drips began their unconventional trek. Aided by gravity, they wound their way down through a maze of tiny cracks in the roof. If a crack came to an end or became too small, they would wait patiently for the freezing temperature to grant them their super powers. As they transformed into ice, they flexed and expanded with tremendous force, enlarging the existing cracks and preparing a way for them to continue their journey when they resumed their liquid state. With each day and freezing night, the group inched its way through the aging roof. Before long, a trail had been blazed, creating a small stream for others to follow. It didn’t take long for one of the walls in the home to begin absorbing a budding contingent of melted snowflakes. It swelled and warped as more drips piled in.

“Oh man, this drywall stuff is nasty,” one said.

“It’s an acquired taste,” an old timer replied. “Mmm, mmm,” he mumbled as he slithered down the wall.

“Dude,” quipped another, “like, I don’t think this was a good idea. We’re totally gonna end up getting cut outta here and trashed. Man, I don’t want to end up as a stain on a wall. Ugh, not cool, man.”

Sid had no intention of sliding down into the house. The idea of seeping into a home seemed unnatural. Besides, he hated the taste of plaster and drywall, and the last thing he wanted was to become a filament of mildew or mold on a gross, stained wall. He didn’t mind waiting with the others behind the ice dam.

Unfortunately, the homeowner hadn’t installed a roof deicing system, which would have prevented Sid’s derelict friends from becoming troublesome drips and trespassing into the house. Eventually however, the homeowner used a roof rake to chip away at the ice dam.

“Whoa!” Sid observed to a nearby friend as the rake slammed down and scraped the ice. “If he’s not careful, he’s gonna damage the roof shingles and then more of our comrades will seep into his home next time.”

“Eh, whadaya gonna do?” his friend shrugged. “I just wanna blow this popsicle stand. C’mon man, let’s get outta here.”

With the dam broken away, Sid and his friends tumbled into the gutter.  He’d made a journey like this once before, resting on a Utah rooftop for over a week before finding his way back to a stream, and eventually back in to the clouds – where he was happiest. After another epic journey through gutters and drains and streams, Sid finally found himself swaying gently in a small lake.

Later that evening he looked up to the stars that shimmered through the wisps of clouds drifting in the moonlight. “Someday,” he reflected, “I’ll be back up there.” The ice dam held Sid for awhile, but now he was on his way home – he hoped. He floated on his back and stared at the sparkling nighttime sky and promised himself, “Soon I’ll find my way back up to the sky. Maybe the sun will warm us up tomorrow, and then I’ll float up to the clouds.” He closed his eyes and drifted off to sleep.

Finding the Right Roof Heating Cable

When it comes to Roof Deicing and Gutter Trace Solutions, Remember this: Not all Roof Heating Cable is Created Equal.

Beware of Cheap Local Hardware Store Heat Cable.

If you’re currently shopping for a roof heating solution, don’t settle on one system too quickly. Before you buy, it really pays to give Warmzone a call. They offer a range of affordable, reliable products to suit your home and your budget; and access to a staff of knowledgeable, reliable professionals to help you make an affordable, informed decision you can live with.

Roof with snow and ice build up, in need of a roof deicing system.

Why not buy heat cable at your local home improvement center? As with any home improvement project, you’ll find there are many options, including many “bargain” roof heating cables that can be easily purchased right off the shelf. Many of these cables are designed to only deliver minimum wattage, which means that they will not perform well in extremely cold temperatures. Warmzone offers a large selection of proven heat cable specifically designed for roof deicing applications that can easily handle any cold-weather job.

Cheaper cable can also suffer from deficits in performance due to poor construction. Consider the outer jacket or covering of a radiant heat cable. On a “typical” cable, this outer jacket tends to bubble or separate from the cable core when the cable is manipulated for turns during installation. These irregularities can create stress points on the cable, allowing water to reach the core, resulting in erratic heating and eventual cable failure.

Warmzone self-regulating heat cable has a higher quality outer jacket that helps to ensure the integrity of the cable. As a result, this flexible cable construction delivers a more consistent, reliable performance than a solution you might find at your typical hardware chain. Warmzone’s roof deicing and gutter trace cable is rated to perform in the worst weather conditions winter can bring.

Heat cable installed in commercial gutter trace application

And if you’re thinking of installing the radiant heat system you just picked up from your local hardware today, you’ll most likely have to wait until the temperature warms up. That’s because the carbon in a “cheaper” cable becomes brittle and can easily break when bent or manipulated in colder temperatures. The good news—unlike “bargain” heat cable, the high quality carbon center and outer jacket of a Warmzone cable remains flexible at temperatures as low as 0 degrees Fahrenheit, so you don’t have to wait until spring to install it.

For long term, reliable performance, Warmzone’s self-regulating “R” cable sets the industry gold standard. RHSR-R is UL listed self-regulating heat cable that can be used for roof and gutter heating as well as pipe tracing applications. This proven cable features a flexible, UV-stabilized thermoplastic elastomer overjacket that protects the carbon core for wet applications and exposure to the sun. This cable is versatile enough for both plastic or metal pipe freeze protection, and temperature maintenance of tanks, pipes and valves, and is covered by a 10-year warranty.

Of course, the best way to save money on your gutter trace system is to purchase an affordable cable that will perform in extreme cold and last as long as your roof. For more information on quality roof deicing solutions, give Warmzone a call at 888.488.9276.

Don’t get Caught in a Deep Freeze. Protect your Home with a Warmzone Roof Deicing System.

Keeping your roof clear of ice and snow buildup is critical to maintaining the integrity of your home, and Warmzone offers the perfect snow melting solution for the job. With a fully-automated Warmzone radiant heated roof, you won’t have to worry about costly ice and water damage, frost erosion or dangerous falling ice any longer.

Roof deicing system heating roof edges and valley

Unlike the bargain roof heating solutions you might find at your local hardware store, Warmzone radiant heated roof systems are rated for extremely cold weather and are fully-automated. They are controlled by automatic sensors designed to detect changes in temperature and precipitation. When conditions warrant, the sensor sends a signal to activate the heating element just as the storm starts, preventing snow from accumulating on your roof. There’s no switch to flip, no weather channel to monitor. With a Warmzone radiant roof heating system, you simply set it and forget it. No matter what the conditions, Warmzone RoofHeat systems will keep your roof, gutters and downspouts clear and dry.

If you’re concerned about the cost of heating your entire roof, no worries! Warmzone offers a wide selection of proven roof deicing systems that can be customized to meet your specific needs. Gutter trace systems, for example, are easily installed in existing gutters and downspouts to melt ice and snow, allowing it to freely flow down the roof and through the downspout and away from your home. Or choose a Warmzone RoofHeat panel system. They also rely on self-regulating heat cable which is channeled into an aluminum panel to quickly warm the edges of your roof and prevent snow from having any chance to build up. Another option, RoofHeat STEP low-voltage heating elements can be installed under the shingles, in roof valleys and problem areas of your roof where snow and ice have a tendency to build up. These low-voltage systems can also be safely installed under metal roofs.

Whatever your strategy, any snow melting solution for you roof is only as good as the cable behind it. Unlike typical “bargain” heat cable, Warmzone’s durable self-regulating heat cable is effective for roofs, gutters and drainpipes regardless of the conditions. Heat cable commonly found in large hardware stores is low-end cable that often tends to crack and break under cold conditions. But Warmzone’s heat cable is more durable under cold weather conditions. The self-regulating heat cable features a solid inner core surrounded by a rugged, durable outer jacket that reduces the chances of “bubbling” or pulling away from the core when the cable is manipulated, and is completely waterproof. The cable can be installed in cold or warm weather to protect your roof and home from ice dams and eliminate the costly results of water damage.

Remember, while those icicles may look pretty, they can be a sign of bigger problems. Make a smart investment in your home by installing a trusted roof heating system from Warmzone. Call today at 888.488.9276.

Baltimore Roofs get Tested During Record Snowstorm

January’s record-breaking snowstorms proved to be a serious test for residential and commercial roofs in the Baltimore area during the winter of 2015-2016. Some homeowners struggled to manually remove snow from their roofs during the infamous blizzard of January 22-23. Snowfall from the multi-day storm ranged from a whopping 22 to 25 inches across Baltimore county.

While most homes and commercial structures were more than capable of handling the heavy stress loads of the recent storms, the subsequent ice dams and potential for snow and ice to break free from roofs and fall on those below proved to be the most significant threats.

Inner Harbor waterfront view of Baltimore
The view of Baltimore from the Inner Harbor waterfront.

Baltimore businesses and building owners are tasked with keeping their roofs in safe condition to prevent snow and ice from falling and injuring pedestrians on the sidewalks below. And though homeowners are less worried about law suits as a result of ice falling from their roofs, they are faced with the potentially costly threat of water damage as a result of ice dams.

As heat rises from the home, it can escape into the attic and warm the roof, causing water to trickle down near the roof’s edge. But since the roof eaves are colder, the water refreezes. As this process is repeated, water can build up behind the ice where it can seep into tiny cracks of the roof. Each night, as the water refreezes, it expands, paving the way for more water to seep into the cracks and eventually into the home. The resulting water damage within walls and ceilings can be expensive to repair.

Warmzone roof deicing systems and self-regulating heat trace cable for gutter heating systems offer ideal roof heating solutions for preventing hazardous ice dams and heavy icicles from forming on roofs. The roof heating systems are easy to customize and install. Once installed the roof deicing and gutter trace systems operate only when conditions warrant, keeping heavy ice from damaging roof gutters and preventing ice dams from forming along roof edges.

In addition to Warmzone’s large variety of industry leading roof deicing systems, Warmzone radiant heat experts work closely with customers to determine the best and most affordable option for the roof.

The most popular roof heating system features an advanced polymer heating element (RoofHeat STEP) that can be installed directly under roof shingles. This low-voltage system has proven to be a favorite roof heating solution among professional installers and homeowners throughout the Baltimore area. Heat trace cable can also be installed to heat gutters and downspouts, or the systems can be combined to produce optimum results.

Warmzone professionals are experts when it comes to roof heating, and its customer service is second to none. In addition to providing complete system designs (AutoCAD), installers have access to free installation training as well as personal installation support. If installers encounter any issues or have any questions during the process, he/she can speak with one of the dedicated installation support staff to resolve the issue.

Many home and business owners in Baltimore are already enjoying the benefits of a Warmzone roof deicing system. To learn more about Warmzone’s roof heating options, or to speak with a radiant heat expert, with no obligation or sales pressure, call 888.488.9276. As an industry leader, Warmzone offers one of the most informative radiant heating websites available. Visit warmzone.com and learn more about radiant heating systems and why some systems (and services) are better than others when it comes to heating specific projects.

Best Roof Heating Systems

Protecting Your Roof and Gutters

With the end of winter and spring approaching many homeowners
may be finding that the harsh winter weather has caused damage to their roof and gutters. Many people don’t give their roofs and gutters a second thought until there is a problem.

Snow and ice can cause damage to roofs and gutters in many different ways. Shingles can come loose due to the contractions and expansion with the change in temperature. Ice dams are the most common problems associated with winter roof damage. A ridge of ice forms at the edge or valley of a roof and prevents the melting snow behind it from draining. The water backs up behind the dam where it freezes and melts again. Eventually water seeps through a weak part of the roof, causing damage to ceilings, walls, and floors, eventually resulting in mold and mildew growth.

Heated roof edges
Heating the roof edges is an economical and efficient way to eliminate dangerous, and potentially costly, ice dams from forming as well as heavy ice and icicles that can damage gutters.

Many people don’t realize that they can do something to prevent the damage that winter weather causes to roofs and gutters. Roof heating systems are becoming an affordable and preferred option for many homeowners. A variety of roof deicing systems are on the market today.

Thin RoofHeat STEP low-voltage heating elements can be discreetly installed under the shingles and help to protect your home during the harsh winter months. This system can also be installed to heat metal roofs. Homeowners also have options to protect gutters from breaking due to ice, and also the buildup of icicles, which can be dangerous to homeowners and their families. Gutter trace systems can be installed to prevent structural damage from heavy snow and ice to gutters and downspouts. When it comes to protecting your home, Warmzone offers many roof heating options, each of which can be customized to best meet your needs.

The best time to take preventive measures to guard against future roof damage is in the early spring. With the threat of heavy snow behind, most people are not thinking of what they can do to make next winter easier. This means savvy homeowners can find better deals on installation and pricing in the spring. When shopping for the best roof deicing system homeowners should take into account the following things.

  • Ease of installation. You want a system that can be nailed or stapled though and installed and cut to fit onsite, facilitating the ease of installation. Such a system can be significantly less expensive.
  • Does the system require maintenance? Electric roof deicing systems are preferable because they are virtually maintenance free, decreasing the cost of yearly up-keep. With an electric deicing system, there is no need for yearly checkups or repair of leaky pipes that may be associated with some hydraulic heating systems.
  • Is it a trusted product with a reliable track record? Don’t be afraid to ask questions about the system and the heating element. Find out what other applications it has been used for. Why is it the best system for you?
  • Is the roof heating or gutter trace system fully automated? How efficient is it? Look for a system without a bulky housing system. You also want to find a deicing system that is fully automated which will make it more effective in that the energy goes directly to snow melting. (Learn how roof deicing systems work.) This will in turn make the cost of operation per hour less. Probably the most important factor to an efficient deicing system is that it is fully automated. This should be on the top of your list of must-haves from a deicing system. A fully automated system can detect the temperature and moisture in the air, and when conditions warrant, it triggers the control unit. The controller then powers up the heating elements warming your roof and gutters just before the snow storm and then shutting off afterward the storm has passed, resulting in maximum performance.

Installing a roof deicing system is an excellent way to prevent damage to your roof and gutters from winter weather. As long as you know what to look for, it is a safe, affordable way to protect and raise the value of your home.

How to Install a Roof Deicing Gutter Trace System

Watch Out for Falling Ice in New York

Roof Deicing Systems Solve the “Falling Ice” Problem

Residents in New York City enjoy a number of perks and conveniences of life in the big city, but the splendor of living among the towering buildings and concrete canyons also comes with its share of challenges. New Yorkers are survivors, and every day during their brisk walks along the streets they’re constantly on guard as they maneuver through a sea of other hurried pedestrians, bicycles, taxis, delivery trucks and so on. The fast pace is all part of life in the Big Apple.

As if these daily obstacles and dangers weren’t enough, there are other hidden dangers that descend upon the city during the snow-filled winter months. As New Yorkers navigate the icy sidewalks and slush-filled streets, a more significant safety threat looms high above, well out of sight and out of mind of most pedestrians.

Removing the snow and icicles from a commercial roof.
Professional roof snow and ice removal team cutting through ice to remove the heavy and dangerous load from the roof.

After heavy snow storms, when temperatures climb back up above freezing, roofs begin to warm and slabs of snow and ice can break away and tumble onto unsuspecting pedestrians below. While most building owners take precautions to avoid this from happening, every year in the Big Apple there are reports of pedestrians being struck by snow or ice that has fallen from roofs or other structures. Streets had to be closed around New York’s new 1 World Trade Center recently when sheets of ice broke free from the 1,776-foot structure and slammed into the ground at 100-mph.

According to New York state laws, pedestrians who are injured from falling ice may seek compensation from building owners or those responsible for falling objects. The ruling of Davis v. Niagara Falls Tower Co. 171 N.Y. 336 (1901), states:

[A building owner]  . . .  must, at his peril, keep the ice or the snow that collects upon his roof within his own limits, and is responsible for all damages if the shape of his roof is such as to throw them upon his neighbor’s land, in the same manner as he would be if he threw them there himself.’

So, the responsibilities of building owners are clear. State law imposes a specific duty upon New York City building owners to ensure that pedestrians are not injured from snow or ice accumulations that fall from their buildings; whereas they must take reasonable steps to prevent ice from falling to the street. These steps typically range from snow guards to automated roof deicing systems.

In addition to commercial buildings installing snow guards or roof heating systems, it’s also beneficial for New York homeowners to protect their roofs and gutters with a radiant roof heating system. While they don’t face the same level of potential liability as building owners in crowded cities, installing a gutter trace system and/or a roof heating system in valleys and along roof edges can ultimately save money in the long run. These affordable roof deicing systems can be customized to meet homeowners’ specific snow melting needs as well as their budget. Heat trace cable can be installed in “trouble spots” on the roof or just in gutters and along the roof’s edge to eliminate ice dams – the principle culprit responsible for costly roof and water damage.

Warmzone roof deicing and gutter trace systems offer one of the best roof heating solutions available for preventing hazardous ice dams and icicles from forming on roofs. In addition to Warmzone’s large variety of industry leading roof deicing systems, Warmzone radiant heat experts work closely with customers to determine the best and most affordable option for the roof.

The most popular roof heating system features an advanced polymer heating element (RoofHeat STEP) that can be installed directly under roof shingles. This low-voltage system has proven to be a favorite roof heating solution among professional installers and homeowners in New York. Heat trace cable can also be installed to heat gutters and downspouts, or the systems can be combined to produce optimum results.

Warmzone professionals are experts when it comes to roof heating, and its customer service is second to none. In addition to providing complete system designs (AutoCAD), installers have access to free installation training as well as personal installation support. If installers encounter any issues or have any questions during the process, he/she can speak with one of the dedicated installation support staff to resolve the issue.

To learn more about Warmzone’s roof heating options, call 888.488.9276. Many home and business owners in New York are already enjoying the benefits of a Warmzone roof deicing system. Call a Warmzone consultant to learn more – with no obligation or sales pressure. As an industry leader, Warmzone offers one of the most informative radiant heating websites available, so visit warmzone.com and learn more about radiant heating systems and why some systems (and services) are better than others when it comes to heating specific projects.

Keeping Roofs Clear of Ice in Newark, New Jersey

With record setting snowstorms blanketing Newark, New Jersey during the winter of 2015-2016, rooftops of commercial facilities as well as residential neighborhoods across the city were sorely tested. And as temperatures warmed after the storms, falling snow and ice posed significant dangers to pedestrians throughout the city.

With building owners in Newark responsible for the safety of their roofs and the safety of pedestrians below, roof snow guards, radiant roof heating systems, and snow removal services are all employed across the city during the winter. The most effective system – by far – has proven to be radiant heat, which is why more and more commercial building owners are turning to the automated roof heating systems. Homeowners in the Newark area are also installing radiant roof deicing systems. While homeowners are less worried about law suits as a result of ice and snow falling from their roofs, they are faced with the potentially costly threat of ice dams.

As heat rises from the home, it can escape into the attic and warm the roof, causing water to trickle down near the roof’s edge. But since the roof eaves are colder, the water refreezes. As this process is repeated, water can build up behind the ice where it can seep into tiny cracks of the roof. Each night, as the water refreezes, it expands, paving the way for more water to seep into the cracks and eventually into the home. The resulting water damage within walls and ceilings can be expensive to repair.

Heavy snow accumulation on roof

Warmzone roof deicing and gutter trace systems offer one of the best roof heating solutions available for preventing hazardous ice dams and heavy icicles from forming on roofs. The roof heating systems are easy to customize and install. Once installed the roof deicing and gutter trace systems operate only when conditions warrant, keeping heavy ice from damaging roof gutters and preventing ice dams from forming along roof edges.

In addition to Warmzone’s large variety of industry leading roof deicing systems, Warmzone radiant heat experts work closely with customers to determine the best and most affordable option for the roof.

The most popular roof heating system features an advanced polymer heating element (RoofHeat STEP) that can be installed directly under roof shingles. This low-voltage system has proven to be a favorite roof heating solution among professional installers and homeowners throughout the Newark area. Heat trace cable can also be installed to heat gutters and downspouts, or the systems can be combined to produce optimum results.

Warmzone professionals are experts when it comes to roof heating, and its customer service is second to none. In addition to providing complete system designs (AutoCAD), installers have access to free installation training as well as personal installation support. If installers encounter any issues or have any questions during the process, he/she can speak with one of the dedicated installation support staff to resolve the issue.

To learn more about Warmzone’s roof heating options, call 888.488.9276. Many home and business owners in Newark are already enjoying the benefits of a Warmzone roof deicing system. Call a Warmzone consultant to learn more – with no obligation or sales pressure. As an industry leader, Warmzone offers one of the most informative radiant heating websites available, so visit warmzone.com and learn more about the radiant heating options available to you.

Warmzone Roof De-icing Systems: Boosting Your Equity Above the Roofline

Invest in Your Home with Roof Heating and Gutter Trace Systems

Right now you probably have a good idea of the condition of your home, from top to bottom. If you’re coming up short above the roofline, the fix could be as simple as a Warmzone electric radiant heated roof or gutter system. During the winter months, ice and snow build up can have a devastating effect on your roof, causing gutters to sag and shingles to break free. The good news—an electric radiant snow melting system can eliminate this damage without emptying your wallet.

Just what can a good roof de-icing system do for you? A well-fitted, properly installed radiant heat snow melting system along your roof line will eliminate prolonged ice-damming during the winter months. Eliminating ice damming, in turn, can prevent unwanted seepage through roofing materials into roof decking. This can cause some serious damage to the roof before finding its way inside to damage ceilings, walls and floors, resulting in mold growth. A Warmzone roof de-icing system is the optimal solution for melting snow and ice from roof eaves, valleys, even entire roofs.

Low-voltage roof heating system being installed.

What’s in an electric radiant roof de-icing system? These radiant heat systems feature three main components:

  • Heating Element – The low-voltage roof heating systems feature a heating element, which is polypropylene fused during fabrication to achieve water proofing and protection from alkaline or salt damage, and installed underneath the shingles. The roof gutter trace systems feature self-regulating heat cable that is placed in the gutters and downspouts to keep gutters free of snow and ice.
  • Power/Control Unit – The controller monitors power and output to ensure safe, accurate, optimal system performance. The power unit monitors the heating element under the roof to melt snow and ice, protecting your roof from ice damage.
  • An activation device (snow sensor) – Warmzone offers different types of sensors. The aerial sensor (which is typically used for roof heating systems) is a gutter-mounted snow switch. Like the aerial sensor, the pavement mounted sensor also detects precipitation and temperatures to signal the controller when conditions warrant. However, this sensor is installed in the pavement (and is used more for heated driveways and snow melting systems than roof de-icing. Both sensors provide fully automated snow melting for your roof de-icing system.

Warmzone roof heating solutions are customizable for just about any roof type and configuration. And Warmzone is the recognized industry leader for providing one of the largest selections of state-of-the-art radiant snow melting systems, including electric and hydronic options. Unlike other “one-solution-fits-all” providers, Warmzone bases a solution on your budget and specific needs to deliver the best performing roof de-icing, driveway heating, or floor heating system possible.

Determining the ideal heat cable, thermostat and sensor for your roof heating job depends in part on the size, type and construction of the roof, and also on the overall requirements of a particular installation. Warmzone is always available, with the experts and expertise necessary to assess your system and determine what you’ll need to optimize overall performance for your home. So, if you’re ready to pull the trigger on a roof de-icing system, give Warmzone a call at 888-488-9276 to discuss your options.