Category Archives: HOTNEWS

HOTNEWS

Designing Radiant Heated Driveways

Warmzone Professionals Take Care of the Leg Work

Installing a driveway heating system represents a significant investment for homeowners. Although the benefits of a heated driveway are impressive, the thought of installing an automated snow melting system may seem somewhat overwhelming. But it doesn’t have to be that way. Warmzone’s support services are the best in the industry, and we make the process of finding and installing the ideal radiant heat system easy for consumers.

Warmzone system designers are among the best. In addition to designing snow melting system for the specific demands and layout of each project, every snow melting system is also designed according to ASHRAE standards. The American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) is an organization committed to advancing the arts and sciences of heating, ventilating, air conditioning and refrigerating to serve humanity and promote a sustainable world. Designing systems according to ASHRAE standards is important to homeowners because it means that their system is designed to perform according to the weather conditions specific to that area. This entails careful research of the weather for the region.

ASHRAE standards were established to address variances for consumers such as their location’s general climate, average snowfall, storm duration, low temperatures, and other important factors. The system design is then “optimized” so that it will perform best in the conditions common in that area. Designing systems according to ASHRAE standards is important to homeowners because it helps to protect them by ensuring that their system is designed to perform according to the weather conditions where they live. So, check with your provider and make sure that your snow melting system is designed not only to accommodate your budget, but in accordance with ASHRAE standards.

Warmzone has provided radiant snow melting systems for commercial and residential projects throughout the country, so our designers are experts who have designed systems for just about every application imaginable. From heated driveways and parking areas to runaway truck ramps, public transit stations, and outdoor malls, etc., we’ve seen it all.

Having experienced pros like Warmzone design your system helps to eliminate any surprises during the installation. Warmzone’s AutoCAD® layout also includes the proper layout and materials, proper load calculations, breaker sizes, and number of breakers, so your electrician will have all the necessary information before any of the installation takes place.

Custom Heated Driveway Options

There are many options for consumers looking when it comes to installing a heated driveway snow melting system. While the whole driveway can be heated, other popular options include heated tire tracks, or heating an 8-foot strip in the middle of the driveway. The heated tire tracks feature two 24-inch wide heated tracks. This not only reduces the cost of the initial investment, but provides a cheaper operating cost as well.

Electric snow melting systems are easy to customize. In addition to being designed to fit your driveway, walkways or steps, radiant heat can also be installed to heat troublesome areas such as inclines or parts of the driveway that are frequently shaded.

Warmzone also has a wide variety of floor heating systems to choose from. Unlike most providers that only offer one, or perhaps two different floor heating systems, Warmzone offers a vast selection of the industry’s most trusted radiant heat systems.

Warmzone heated floors range from the popular ComfortTile floor heating cable to the near paper-thin FilmHeat system. Other systems include FloorHeat’s thin, low-voltage polymer heating element, FoilHeat’s cable sandwiched between two sheets of specially reinforced aluminum foil, the Prodeso floor heating membrane, and more. We even carry the RetroHeat system that allows homeowners to install radiant heat under existing floors. The thin heating panels are stapled up between the floor joists and then batt insulation is installed to direct all of the heat upward to the floor. This is an effective and affordable solution for heating existing floors.

To learn more about the many radiant heat options that are available, contact Warmzone today at 888.488.9276.

HOTNEWS

Radiant Heated Driveway System Components

Warmzone Makes it Easy for Installers

There are many options when it comes to installing a driveway heating system. While radiant heated driveways can be installed to keep entire driveways clear of snow and ice, the systems can also be easily customized to meet the specific needs and layout of the customer.

Electric heated driveway systems are fully automated and maintenance free, and simple to customize. Radiant heat can be installed in troublesome areas, such as inclines or shaded areas that are prone to ice buildup during the winter. Or, instead of heating an entire driveway, two 24-inch wide tire tracks can be installed. This not only can reduce the initial investment cost, but also minimize the power requirements and operating costs. Although heated driveways are a popular option for many homeowners and businesses, homes with inclined driveways that spill into a busy street make radiant heat a virtual necessity. Fortunately, the layout options of these versatile systems are unlimited, allowing customers to tailor their radiant heating systems to best accommodate the snow melting needs as well as their budget.

The layout options of these versatile systems are virtually unlimited, allowing customers to tailor their radiant heating systems to best accommodate the snow melting needs as well as their budget. Heated driveways can be a popular, convenient option for many homeowners and businesses, but homes with inclined driveways that spill onto a busy street make automated snow melting a virtual necessity.

Heated driveway with brick pavers

Industry Leading Heated Driveway Components

Warmzone automated snow melting systems feature the industry’s most trusted and proven components. The fully automated systems include ClearZone heat cable, snow sensor (activation device), contactor panel (available with or without GFEP), and marker plate (as required by the NEC).

ClearZone Heat Cable

Warmzone’s snow melting heat cable is a proven industry leader that is being used in a variety of radiant snow melting systems throughout Northern America.  The ClearZone heating cable features superior workmanship and materials, and is UL listed. The twin-conductor, single-point connection heat cable is designed with FEP/XLPE insulation and polyolefin jacketing (for flexibility and UV protection), allowing the radiant heating system to consistently provide top performance during extreme winter conditions.

Coupled with Warmzone’s proven industry-leading customer support services and 10-year manufacturer warranty, the ClearZone snow melting system is designed and built to outperform all competing products. While ClearZone cable is rated at 220°F, a special version of ClearZone cable is also available for hot asphalt installations. The maximum external jacket temperature for asphalt applications is rated at 460°F (240°C) for up to 10 minutes.

Snow Sensor (Activation Device)

Warmzone carries the premier aerial-mount and in-ground snow sensors. The advanced aerial-mount snow sensor is capable of sensing temperature and precipitation. When precipitation is detected and the temperature is below the ‘trigger point’ (normally set at 39°F), the unit signals the snow melting system controller (contactor panel). Power is then sent to the heating cable embedded in the driveway, warming the surface and preventing any snow buildup.

Aerial mount snow sensor
A WS-2C aerial mount snow sensor for automated snow melting systems.

Smart system compatible, the aerial snow sensor also features adjustable delay off cycle, and upgradeable remote activation, as well as the adjustable temperature set point.

The in-ground snow sensor is also optional for Warmzone snow melting systems. This activation device is more commonly used in large commercial snow melting applications, but can be used in residential systems if desired. The pavement-mounted sensor requires the small control unit rather than the contactor panel. The control unit is a small, NEMA 1, wall-mounted control panel, approximately 6×3.5 inches wide and about 3.5-inches tall. The unit can be controlled from an external signal (day/week timer, GSM-module or other signal source) and can be switched on/off (standby). The controller features a 4-hour timer that serves as a manual backup to melt snow drifts or ice that may have formed on the driveway due to wind or shade.

Contactor Panel

To save installers time and money, Warmzone offers contactor panels with and without built in ground fault equipment protection (GFEP).

With GFEP: The ground fault equipment protection helps to minimize the risk of faults and eliminate extra wiring installation steps and costs. The panel is activated by a Warmzone activation device (either an in-ground or aerial-mount sensor).

Without GFEP: The Warmzone contactor panels are designed for snow and ice melting applications. All panels are pre-wired and UL listed complete with a NEMA 4 enclosure, wiring diagram, terminal connection block, and two or four 3-pole contactors. Timer panels can be used stand alone or in conjunction with an automatic controller. Contactor panels must be used in conjunction with an automatic controller.

In addition to Warmzone’s industry leading system components, Warmzone provides unparalleled customer services, including free installation training, technical support, and system design and layout services. A vast online library of installation videos and product documentation is also available on Warmzone’s website. Contact Warmzone today for more information or to receive a free quote. Call 888.488.9276 today.

HOTNEWS

Roof Deicing Systems

It’s time for your spring roof and gutter inspection.

According to experts, homeowners should inspect their roofs, gutters and downspouts at least twice a year. Roofing pros suggest checking it during spring time and in late fall, in preparation for the upcoming winter.

Roofs are generally very sturdy and built to last. But sometimes extreme weather or accidents can jeopardize the integrity of a roof.  And even the slightest flaw can lead to costly water damage. So before you fall victim to water damage from a leaky roof, make the effort to inspect your home’s lid so you can rest easy during summer rain and winter snowstorms.

Ice dams pose the single greatest threat to roofs in cold climate areas. Ice can cause problems that start out so small it’s difficult for homeowners to recognize. However, the small problem can grow into a large problem and result in serious water damage to the home. The damage may even take years to develop as ice dams tend to form in the same area year after year. That’s why it’s so important to keep up on the biannual inspections.

Clearing snow off of roof

During winter in locations that receive significant snowfall, warm air can escape from the living area and into the attic where it continues upward, warming the roof and causing the bottom layer of snow to melt. The runoff trickles down the roof, but when it reaches the colder eaves (where the roof extends out and no heat from the attic can reach), the water refreezes, causing a small ridge of ice to form.

This process tends to repeat itself day after day, and before long the small ridge of ice has grown into a large ridge. The runoff from the roof eventually pools behind the ice dam, and this is where things can get ugly. When a pool of water sits on a roof, every tiny crack and imperfection in the shingles or plywood can be exploited. Water finds its way into every crack or flaw in the roof. At nighttime the water refreezes and expands, enlarging the cracks and breaking down the overall integrity of the roof.

After your spring inspection of the roof, perhaps now is a good time to invest in an affordable roof deicing system. Several options are available, ranging from affordable self-regulating heat cable to low-voltage polymer heating panels that are installed directly under the roof shingles.

Self-regulating heat cable can be run through roof gutters and downspouts, as well as in a zigzag pattern along the roof eave. By installing the heat cable in a serpentine pattern the cable provides channels for the runoff to reach the gutters, thereby minimizing the chances of ice dams from forming.

The low-voltage RoofHeat STEP system features thin polymer heating panels that can be installed under shingles or metal roofs. The element can be nailed or stapled through and cut on site. The heating element is also self-regulating.

Low-voltage radiant heating element.

These industry leading roof deicing systems keep the entire roof edges free from snow and ice, whereas the individual runs of heat cable simply provide channels for the runoff. Because the RoofHeat STEP system is low-voltage, it uses transformers to step down high voltage to low voltage (60 V or less). Each transformer controls a specific section of the roof deicing system. And Warmzone roof heating systems can be easily customized to meet the precise needs of each customer.

Industry Leading Support Services

Warmzone is an innovative industry leader in terms of product offering and customer services. Free installation training is provided as well as installation support and professional system design and layout. Electrical and radiant heat experts are on hand to assist you during the training and/or the installation. A library of helpful installation videos is also available on Warmzone’s website, as well as a wealth of product information and documentation.

For more information, check out our website or call us today at 888.488.9276.

HOTNEWS

Radiant Heated Driveway Systems

The weather is warming up and so is the construction season. Perhaps now is the time to install a heated driveway or roof deicing system so you’re prepared for next winter.

Radiant heated driveways provide fully automated, maintenance free snow removal for your driveway and/or sidewalks. The systems are reliable and easy to customize to best suit your exact layout and snow melting needs.

Heated driveway in concrete

How Heated Driveways Work

Heated driveways rely on a network of heat cables embedded in the driveway medium. The cable can be installed to heat concrete, asphalt or paver driveways. (Hydronic systems utilize Pex tubing, whereby specially treated hot water is circulated.) A snow sensor can be installed in the surface of the driveway or mounted near the roof. It must remain exposed to the elements. The sensor detects temperature as well as precipitation, so when weather conditions dictate, the sensor will signal the system controller and then power is sent to the heating cable, warming the driveway.

Installing a Heated Driveway

Heated driveway systems are not difficult to install. Warmzone provides complete system design and layout services to facilitate quick, proper installation. This document also includes all the information necessary for the electrician, such as proper materials, load calculations, breaker sizes, number of breakers, etc.

The heat cable is laid out according to the design provided. For concrete heated driveways, lay out the cable and then use zip ties to secure it to the re-mesh. (The cable should remain within 2 inches of the surface.) Concrete is then poured over the secured cable. The contactor panel (or controller) is typically mounted on a wall in the garage. Warmzone offers contactor panels with or without GFCI protection.

Electric heated driveways feature fast response times. The driveway is quickly heated after the sensor detects the first snowflake, preventing any snow buildup. Another advantage of electric driveway heating systems is that they are maintenance free and very reliable. Unlike hydronic systems that require a special mechanical room for the boiler, manifold and pumps, electric systems only require a small space on the wall of the garage for the controller or contactor panel.

Heated paver sidewalk

Radiant heat systems are also remarkably efficient. There’s virtually no heat loss, as 99 percent of the energy goes directly to melting the snow. The efficiency of radiant heat also makes it a popular choice for heating homes.

And the systems are fully automated. The snow sensor, also referred to as an activation device, detects the weather conditions (both temperature and precipitation). Once snow starts to fall the sensor signals the contactor panel and power is sent to the embedded heat cable. The driveway is warmed and snow is prevented from accumulating.

In addition to the beneficial features of a radiant heated driveway, Warmzone also includes complete customer support with each system. In addition to the professional system design, Warmzone also offers free installation training. This is a valuable service that helps to ensure the proper installation of the system. Free installation support is also provided. If your installer encounters any issues during the installation, he/she can call Warmzone to receive support. We are committed to providing the best products and best support services in the industry.

For more information about our radiant heat systems, call 888.488.9276 today.

HOTNEWS

Timing is Everything

The Benefits of Installing Radiant Heat During the “Off” Season

Although you may feel that you’re still firmly in the cold clutches of Old Man Winter, take solace in the knowledge that spring is just around the corner. And with warmer weather comes the opportunity to start – or finish – those construction projects that you’ve been planning. For professional builders, warmer temperatures thaw out the slow winter business and the trickle of work often turns into a torrent, complete with deadlines, demands, and new challenges.

Get a jump on your radiant heat projects by purchasing your materials early. There’s a good chance that you may be able to take advantage of “early bird” discounts on self-regulating roof deicing systems, floor heating, and ClearZone snow melting system components. And if you’re a homeowner, you’re much more likely to find an available installer at this time of the year. Later in the season – during prime construction time – finding a contractor – let alone, the one you prefer – who can accommodate your schedule can be a real challenge.

Panorama of Chicago during winter

Speaking of contractors and installers, Warmzone maintains a database of experienced, favorably reviewed professionals in your area, so you can be assured that your system is being installed by pros who know about radiant heat systems. And finding these experts early in the construction season is a whole lot easier (and sometimes more affordable) than trying to find one late in the summer.

Warmzone is an industry leader, not only because of the quality of our systems, but because of the wide selection of radiant heat systems and our unparalleled customer services. In addition to one of the largest and most diverse selections of radiant floor heating, roof deicing, pipe tracing, and snow melting solutions, Warmzone provides the industry’s most comprehensive service.

When you first contact Warmzone, our professionals will learn about your needs and then provide you with information about the options that would be best for your needs. Because we carry several different brands we’re not locked into offering just one or two options by one manufacturer. Our experts will carefully evaluate your needs and then recommend accordingly.

Free System Design – We can provide you with a detailed AutoCAD system design that not only covers the layout and materials of the system, but also includes all the technical information necessary for your electrician. This information includes proper load calculations, breaker sizes, number of breakers, and so on. You’ll know all the details prior to any installation taking place.

Rolling out snow melting heating mats.

Free Installation Training – Warmzone also provides free interactive installation training. This is an invaluable service that can ultimately save a great deal of time and money in the long run. A radiant heat expert will personally cover all the aspects of your installation, and you can ask questions and proceed at a pace that’s comfortable for you. Most training courses take less than an hour, but having this expertise under your belt allows you to install with confidence, and avoid costly or time consuming mistakes.

Free Installation Support – Our support staff is also on hand during the installation. If you or your installers have any questions during the installation, these can be resolved simply by calling Warmzone. Our staff will walk you through the process and help ensure the proper installation – and a happy customer.

Talk with a friendly professional at Warmzone today and get the ball rolling. Radiant heat systems are easy to customize, and our designers are experienced in designing systems that best meet the customers’ radiant heat needs as well as their budgets. Call and learn more about the many affordable options and Warmzone’s industry leading customer services today at 888.488.9276.

HOTNEWS

February HotNews – Radiant Floor Heating Systems

Radiant Heat – The Heating System of Choice for New Construction Projects

With the emphasis on renewable energy and enhancing the efficiency of our homes nowadays, it’s no wonder that radiant heat is fast becoming the heating system of choice for new home construction. Radiant heated floors boast virtually no heat loss as over 99% of the energy devoted effectively translates into heating the home. Unlike traditional forced-air heating systems where hot air rises quickly and cools in the room (and escapes from closed vents), radiant floor heating systems feature no heat loss and precise control, as each room (or zone) is controlled by its own thermostat.

Heated bathroom floor

In addition to its remarkable energy efficiency, radiant floor heat also provides luxurious warmth. Installing a radiant heat system in your home not only can enhances cost savings and comfort, but can also significantly boost the value of your home.

Radiant floor heating systems consist of three main components: a heating element, a control center and an activation device (thermostat, timer, etc.). Warmzone offers a variety of the industry’s most advanced thermostats with its floor heating systems. The thermostats include simple on/off controllers and 7-day programmable thermostats that can be controlled by an external sensor (embedded in the floor), a built-in sensor, or a combination of the two. By installing heated floors, homeowners can turn a small investment into considerable cost-savings that also increases the value of your home.

The Types of Heating Elements

To accommodate the many different floor types and applications, Warmzone offers one of the largest selections of floor heating systems. The various systems utilize different types of heating elements, each with their own strong points and advantages.

ComfortTile floor heating mat

The most common and popular heating element is thin ComfortTile heat resistance cable. The cable diameter is only about 1/8-inch and has a bending radius of about 1 inch. It is twin-conductor cable with a single point connection to facilitate easy installation. And speaking of easy installation, ComfortTile mats feature heat cable that is pre-spaced on a flexible mesh backing for simple “roll out” installation. With a 25-year limited warranty, and UL listed in the U.S. and Canada, ComfortTile heat cable is one of the most trusted and commonly used floor heating solutions today.

Prodeso floor heating membrane
Prodeso radiant floor heating membrane and cable shown installed on cement base slab to heat a tile floor.

Thin heat cable can also be used with other components, such as the Prodeso® floor heating membrane. The uncoupling, waterproofing membranes come in rolls that are laid out over the subfloor and then the heat cable is installed in the channels of the membrane. This ensures precisely accurate spacing and speeds up the installation process. The floor surface is then installed directly over the membrane and heat cable. The system can be used to heat a wide variety of floor types.

A thicker, highly rugged heat cable is also available for installation in concrete slabs. In-Slab heat cable provides an efficient and highly effective means for heating floors that are installed over concrete slabs. The heat cable is secured to the remesh (with zip ties) and the concrete is poured. In-Slab floor heating systems are ideal for heating basement level floors. The twin conductor, single point connection heat cable features a 10-year manufacturer warranty.

Another heating element features thin FilmHeat (only 0.016-inch thick) that can be cut to length on site and either placed on the subfloor to heat newly constructed floors or stapled up between floor joists to heat existing floors. For new floors, this heating element is installed by floating it on top of an underlayment and floating the floor covering on top of the film. No alarms, special tools, or self leveling compounds are needed. This versatile system is very energy efficient, and because it is so thin there is no floor buildup. The system can be used to heat a range of floor types, including laminate, floating tile, engineered wood, and even bamboo.

Low-voltage radiant heating element.

Thin polymer FloorHeat panels can also be installed to heat a variety of floor types, including hardwood. This low-voltage system is one of the most unique and innovative radiant heat systems, and features self-regulating heating elements. Purchased in rolls, the thin, 12-inch wide heating element can be cut to size and field wired onsite for easy installation.

Another ultra thin FoilHeat electric radiant floor heating system features thin fluoropolymer insulated heating cables that are sandwiched between two layers of specially reinforced aluminum foil. Featuring superior design and quality construction, FoilHeat is another viable option for heating laminate floors.

The watertight heating element is connected to a power-supply cable that exits the laminate mat from one corner. The power lead is a flat, thin two-core flexible cord, consisting of two insulated conductors with a metal sheath and an outer sheath. The uniform spacing of the heating cable, backed by the conductive aluminum foil, ensures that there are no problems of “hot-spots” or localized heating. FoilHeat mats can be cut and shaped onsite.

In addition to the vast selection of electric radiant floor heating systems, Warmzone also offers industry leading hydronic floor heating solutions. For more information about our radiant heat systems, call 888.488.9276 today.

HOTNEWS

Automated, Maintenance-free Snow Melting Systems

Custom Heated Driveways, Sidewalks and more

Warmzone has been designing snow melting systems for a wide variety of applications for almost two decades. From commercial parking structures and residential driveways to sidewalks, steps and even runaway truck ramps, we’ve provided a radiant heat solution for just about every application imaginable.

Warmzone customers choose to install snow melting systems for several reasons. Some are for commercial applications and are installed to eliminate the need for manual snow removal as well as to enhance safety for patrons. Being fully automated, radiant snow melting systems provide reliable snow removal, regardless of the hour. This way, customers are assured of having clear walkways to and from the business.

Some clients are unable to manually shovel the snow due to physical/medical limitations. Others need to heat their driveway because it is on a steep incline. Doctors and emergency response personnel need to be able to exit driveways quickly, regardless of the weather, and radiant heat has proven to be ideal under those circumstances. And of course, there are some projects that fall into the “luxury” category.

Regardless of the customer’s need, each Warmzone snow melting system is customized specifically to best meet the needs of the customer. We do not take a “one size fits all” approach. Every Warmzone system is designed to ASHRAE standards to ensure that customers receive the most effective and efficient snow melting solution for their location, layout, and snow melting needs.

Warmzone provides industry leading system design services. Our detailed AutoCAD drawings not only show the layout of the cable and components, but include all the necessary electrical information, such as the proper load calculations, breaker sizes, number of breakers, etc.

Fully Automated

Warmzone snow melting systems feature the industry’s top controls. Most driveway heating systems utilize the WS-2C aerial-mount snow sensor (activation device). The unit features an interleaved grid “moisture” sensor at the top and the brass cylinder protruding from the bottom of the unit is the temperature sensor. When the controller detects precipitation and the temperature is below the designated set point, the unit signals the contactor panel and power is sent to the heating cable. The UL listed panels are available with or without GFEP included. (This is an excellent cost – and time – savings option for electricians.) The resistance cable then warms the driveway surface.

Aerial mount snow sensor
A WS-2C aerial mount snow sensor for automated snow melting systems.

The advanced snow sensor is mounted out in the open where it has a clear view of the sky and is exposed to the weather. To ensure that the sensor is able to make accurate temperature readings, make sure it is not mounted near furnace vents, dryer vents or any other source of heat.

Maintenance Free Snow Melting System

Because the system has no moving parts it requires no routine maintenance; however, it is recommended that the sensor be powered down and the small sensor grid be wiped clean with clear water once every 4 months.

Radiant heated driveways and snow melting systems can be easily customized to accommodate the homeowner’s layout, snowmelt needs, and budget. While every snow melting system can be tailored for each unique installation, some common layout options include:

Heat the most trafficked areas – Rather than heating the entire driveway, some owners choose to heat only the areas that receive the most traffic. An 8-foot strip in the middle of the driveway or a 2-foot strip down the middle of a sidewalk may be all that the customer needs/wants. This still allows clear access for vehicles and/or pedestrian traffic, but brings down the installation cost as well as operational costs.

Heated tire tracks – Another affordable option (that also requires considerably less power) is to heat two 24-inch wide tire tracks. This is a popular solution for customers with limited power or a limited budget. Not only does this make the installation more affordable, but the layout also demands less power, making it more affordable to run.

Heated driveway on incline with heated tire tracks

Heat Specific Areas – Some areas are prone to ice buildup or are on a steep incline. Radiant heat can be installed to keep the incline (or shaded areas) clear of snow and ice to enhance safety as well as convenience. This is especially beneficial for those with driveways that run downhill and into a busy road.

Because Warmzone radiant snow melting systems are fully automated, business owners can be assured that parking areas and walkways are kept clear at all times during snowy days. There’s no need to have employees arrive early to shovel or go outside periodically to clear and salt the walks. When a snowstorm hits, the radiant heat system will activate and keep the walks clear. Once the storm abates, the system remains on for a short time to dry the area (to prevent ice buildup) and then shuts off. Because this “after run” feature provides dry, safe walking areas for customers, it greatly reduces the chances of business owners being hit with dreaded personal injury lawsuits.

Industry Leading Support Services

Don’t forget, Warmzone is the innovative leader when it comes to customer service. Installers not only receive a detailed layout with all the technical information, but can talk with a radiant heat expert any time and receive technical support whenever they have a question during the installation. (See Warmzone’s November Newsletter below for more information about Warmzone’s system design services.) Warmzone also hosts a library of helpful installation videos on its website. Check out Warmzone’s Installation Videos here.

Warmzone also provides free installation training. Installers receive personal training and can complete the installation course at their own pace. Electrical and design experts are on hand to assist you during the training and/or the installation. Warmzone stands by its customers to ensure that the system is installed correctly and the customer is satisfied.

For more information, or a free quote, contact Warmzone today at 888.488.9276.

HOTNEWS

December HotNews – Roof Heat Trace Systems

Roof Gutter Trace Systems

Self-regulating Heat Cable for Gutters, Downspouts, Valleys and More

During the winter months many homeowners scramble to find a way to protect their roof gutters from heavy ice buildup. Icicles can also form, creating dangerous conditions for pedestrians below. Not only does falling ice present a danger, but melting icicles drip onto the sidewalk below and the water refreezes in the evening, creating a thin sheet of slick ice. Needless to say, these conditions are a nightmare for business owners.

The most popular and trusted method for keeping roof gutters and downspouts free of snow and ice is installing a heat trace system. These affordable systems are easy to install and are fully automated. The reliable, maintenance free roof deicing systems rely on durable self-regulating heat trace cable.

Self-regulating heat cable

Self-regulating heat cable automatically adjusts its power output to compensate for temperature changes. The cable’s irradiated conductive core increases the heat output as the outside temperature falls and decreases the heat output as the temperature rises. This unique construction makes it durable, safe, and extremely energy efficient.

The UV stabilized, flexible thermoplastic elastomer overjacket protects the durable carbon core for wet applications and exposure to the sun. These features provide more consistent performance, longer lifespan, and easier installation in cold temperatures that most other cable brands. In addition to providing ideal protection for roof and gutter applications, the heat cable can also be used for pipe tracing applications.

The other key component to Warmzone’s industry leading roof deicing and gutter trace system is the WS-8C aerial-mount snow sensor. This advanced sensor is designed primarily for gutter, downspout, and roof ice melting and small satellite antenna deicing. The totally sealed, low voltage, remote mount precipitation sensor allows the user to install the small sensor head in a downspout, the back of a gutter, or at the end of an antenna boom, up to 10 feet away, while keeping the main controller in a more convenient or protected outdoor location.

Warmzone roof heat tracing systems are affordable and effective. And once installed, you never have to worry about it. The system automatically operates when needed.

In addition to installing the cable in roof gutters, downspouts and valleys, the cable can also be zigzagged along the roof’s edge to help break up ice dams. The heat cable prevents water from pooling up behind ice dams by providing channels for the runoff to reach the gutter.

However, if your roof is consistently dealing with ice dams, that may be an indication that your attic is poorly insulated. Certainly, a roof deicing system can be installed at your roof edges to eliminate ice dams, but it is also recommended that you check your attic to ensure that it is properly insulated as well.

Roof in need of a roof deicing system

Ice dams form as a result of warm air rising from the home and escaping into the attic where it warms the roof and causes runoff. The melted snow reaches the colder roof overhang and refreezes. Eventually a ridge of ice forms and then subsequent runoff pools behind the ridge of ice. Water can seep under shingles and when it refreezes damage may occur.

Warmzone can provide a variety of custom roof heating solutions for you. Call today and see what options would best suit your needs. Any system can be customized to meet your specific roof heating needs and budget. Call 888.488.9276 today.

Features and Benefits of Warmzone’s Roof Heat Trace Systems

  • Will not overheat or burnout when overlapped
  • Superior quality outer jacket and carbon core
  • Features advanced technology that results in highly effective, energy efficient operation
  • Can be cut to length in the field
  • Fully automated
  • Maintenance free
  • Protects roofs by preventing ice dams and ice buildup
HOTNEWS

What Makes Warmzone’s Design and Support Services the Industry’s Best?

Unmatched Support and Design Services – Reasons why Warmzone Heated Driveway Systems are Better than any Other

When shopping for a radiant snow melting, floor heating, or roof deicing system, there are several factors to take into consideration to ensure that you install the best system for your needs and that it will perform the way that you want it to. With so many options out there, it can be difficult for homeowners to narrow down the field of potential system providers. So when it comes to installing a heated driveway or floor, what are the key factors to look for? What factors distinguish one system over another?

Certainly you’ll want reputable, proven system components. For a heated driveway / snow melting system this includes the heating element (cable), snow sensor, and the contactor panel or controller. A quality system begins with quality components. This is an area in which Warmzone excels.

Snow melting system heat cable and components

But a few providers may offer some components of similar quality. So, to further separate the “great” from the “good”, we need to take some other factors into consideration. If you’re sure that you’ve found the highest quality system components, you’ll next need to find out what services are included with those quality components. What role will your provider play in regards to the installation of those top quality components?

Genuine Customer Service versus Customer Service Hype

When it comes to service, too many radiant heat system providers deliver lip service rather than genuine customer service. Few businesses have a trained, dedicated support staff, so installers often end up speaking with sales people or whoever else happens to be free at the time of the call. But radiant heat customers deserve better. Great customer service not only means friendly, technical installation support, but includes accurate system design and layout services.

Example of Warmzone radiant heat system AutoCAD
Example of a snow melting system design drawing.

It is vital that you have a detailed layout of your system. This not only includes a “road map” of how your heating cable is laid out, but also where and how it is wired to the contactor panel and activation device (snow sensor). The system layout must be created by an experienced designer and electrical expert. Professional system designs should also contain all the technical information for your electrician. Every aspect of the snow melting system should be included so that your electrician and installer know every detail prior to installing any heat cable.

Warmzone offers an AutoCAD drawing of the layout with all the technical information necessary to move forward with the installation. System layouts should include proper layout and materials, proper load calculations, breaker sizes, number of breakers, etc. We make sure that your installer and electrician have all the information necessary to begin the install with confidence. And that includes free installation training.

Honestly, what makes Warmzone Different? 

Warmzone’s pre- and post sales support is unmatched. We won’t abandon you after the sale. We answer your questions, evaluate your project needs and then assist you before, during, and after the installation. Here are some specifics that identify why we’re so different:

Pre-sales system design – Warmzone provides pre-sales system design services. This is offered to ensure that the system meets all of your requirements. There’s no need to purchase a system and then worry whether it will perform adequately for your specific application and layout. If you choose to move forward with the purchase, Warmzone will include an AutoCAD layout at your request.

Free Installation Training – Knowing how vital the proper installation is, Warmzone provides free installation training for installers and electricians. We’ll cover all the aspects of your specific installation, and we’ll be available if you have any questions during the install. This training is invaluable for installers and a great benefit to homeowners.

Technical Support – While installing a radiant heating system is relatively easy, and the installation manual covers all aspects of the install, sometimes it still helps to talk with an expert. Warmzone has a dedicated staff of support personnel available to answer your call. If an installer or electrician has questions during the installation, he/she can call and speak with an expert who will work with them to resolve the issue at hand.

Programming the Controller – We assist in programming the controller based on ASHRAE standards. (The settings depend on the ASHRAE standards mandated for the specific area where your system is installed.)

Commissioning Large Systems for Service – Warmzone support experts are also available to assist customers in the startup and commissioning of large systems for service. For example, for a heated runaway truck ramp in the Northeastern U.S., a Warmzone expert not only provided technical support onsite, but commissioned the system after the installation to ensure optimum performance.

Special Equipment – On rare occasions, an installer’s helper may accidentally damage the cable during the installation, but then not mention it so as to avoid repercussions. Then the concrete is poured but the system doesn’t perform as it should. Warmzone has the equipment to locate and repair the cable fault, so there’s no need to tear up a large portion of the driveway. This is a service that few – if any – other providers offer.

Large heated paver driveway

Warmzone installation experts are available to walk installers through the installation process, and they continue to be available after the system is installed. This ensures that all the customer’s questions are answered and the automated system is ready for the first snowfall.

Warmzone focuses on the long term goal of making customers happy rather than just selling snow melting systems. For customers to be satisfied, they need to be treated with respect and work with a friendly support staff that goes the extra mile. With our staff, we can provide consumers with expertise and genuine, personal support services that make them feel more like a partner than a customer.

For details about our products and services, contact a friendly professional today at 888.488.9276.

HOTNEWS

October HotNews – What Makes Warmzone Snow Melting Systems Better than Others?

A Look Behind the Making of a Great Snow Melting System

Radiant heat snow melting systems are easy to customize and can be installed in just about any time of medium and application. Snowmelt systems are versatile and can be custom designed to heat driveways, loading docks, ramps, bridges, steps and more.

But did you know that Warmzone custom designs your snow melting system according to a wide range of variables, including the specific weather trends in your region? That’s right; the design process goes way beyond the basics of square footage, available power and budget.

Your heated driveway is carefully tailored to provide the best and most cost-effective snow melting results according to the typical weather conditions in your area. Some of the factors considered when designing a system include the average winter temperature, average annual snowfall, project application, layout demands, and the medium used (i.e., concrete, asphalt, pavers). Just like the snowflakes they melt, each heated driveway system is unique. Despite having the same general layout, a snow melting system at the top of a ski resort is going to differ from a heated driveway down in the city.

Heated paver walkways at outdoor mall

After the snow melting components have been selected and the system has been carefully designed, the next step is to make that design come to life with a proper installation. NOTE: It’s important to understand that no matter how brilliant the system design may be, the performance of the system hinges on the correct execution of every aspect of the installation.

Knowing that the proper installation of these systems is so important, Warmzone provides free installation training and installation support services. We stand by our customers throughout the installation process to help ensure that the system is properly installed.

Prior to the installation training, it’s helpful for installers to take advantage of the information available on our website. In addition to a wealth of online product documentation and illustrations, Warmzone hosts a vast resource of instructional videos. This valuable resource can help installers gain a better understanding of the systems, how they are installed, and how they function.

Next, the installer should sign up for training. Warmzone’s free installation training courses can be scheduled through our website. Installers can sign up for a time that is convenient for them and then receive personal instructions via WebEx. Installers are also welcome to attend free training courses at our Salt Lake City facility. The course takes less than an hour and the attendee can ask as many questions as he/she sees fit.

When laying out the heat cable for the system, it is vital to maintain proper spacing so that the cables never touch or cross over each other. Typical spacing for a heated driveway is either 4 or 3 inches (37 or 50 watts per square foot). For concrete pours the cable should be secured to the remesh using zip ties. Mesh-Up plastic supports should be placed under the remesh to keep the cable elevated in the cement slab. Ideally, the heat cable should be about 2 inches from the surface of the driveway or area to be heated. The cable’s power lead is then run to the control panel. (The splice must remain embedded in the concrete.) Because electric snow melting systems feature no moving parts, they require no maintenance.

Snow sensors for automated snow melting system
An aerial-mount and a ground-mount snow sensor activation device.

When snow is detected the sensor signals the controller which then sends power to the heating cable, warming the driveway surface. After the storm, the “afterrun” function keeps the system running for a short period to dry the surface so that no ice forms.

Radiant snow melting systems have proven to reliably and efficiently provide snow melting around the clock. Owners can rest easy, knowing that the snow melting system is keeping the driveway and/or walks free of snow and Ice.

For more information about Warmzone snow melting, roof deicing or floor heating systems, contact a radiant heat expert today at 888.488.9276.